From pcarworkshop
Basic Maintenance:
This is a short list of common torque specifications. If you want a complete set, upload the Specification Booklet in PDF, it has every specification you ever wanted to know about, including internal engine torques.
Conversion:
NM->Ft-Lbs = 0.737
Ft-lbs->Nm = 1.356
General items to drop engine
| Item |
Nm |
Ft-Lbs |
| Wheels |
130 |
96 |
| Rear stablizer bar to cross member |
23 |
17 |
| Rear stabilizer bar to stablizer mount |
46 |
34 |
| Stablizer mount to spring strut |
46 |
34 |
| Gearshift Rod Torque |
23 |
17 with locktite |
| Clamping Sleeve (C4) |
30-41 |
22-30 |
| Toe control arm to wheel carrier |
85 |
63 |
| Cross Member rear to side section |
120 |
88 |
| Cross Member front to side section |
65 |
48 |
| Pressure line to PS pump |
30 |
22 |
| Oil return tube |
20 |
15 |
| Starter to transmission |
46 |
34 |
| Engine mounts |
85 |
63 |
| Transmission Mounts |
46 |
34 |
| Driveshaft flanges to transmission |
81 |
60 |
| Excentric Bolts for Toe |
100 |
74 |
| Front axle final drive mount to central tube (C4) |
88 |
65 |
| Central Tube to transmission |
85 |
63 |
| A/C Compressor Bolts |
28 |
21 |
Brakes and Suspension
| Item |
Nm |
Ft-Lbs |
| Front Calipers to mount |
85 |
63 |
| Front disk to wheel hub |
5.4 |
4 |
| Rear calipers to mount |
85 |
63 |
| Front Strut bolt (upper) to hub (camber alignment) |
120 |
89 |
| Front strut tower to hub |
200 |
148 |
| Strut tower bolts |
33 |
24 |
| Shock center bolt |
80 |
59 |
| Front sway bar bracket |
23 |
17 |
| Front sway bar drop link to sway bar |
46 |
34 |
| Front sway bar drop link to hub |
46 |
34 |
Engine
| Item |
Nm |
Ft-Lbs |
| Spark Plugs |
30 |
22 |
| Flywheel to crank |
85 |
63 |
| Belt Pulley to crankshaft |
170 |
125 |
| Oil drain plug for Crankcase |
50 +- 5 |
37 +- 4 |
| Oil drain plug for Oil Tank |
50 +- 5 |
37 +- 4 |
| Chain housing cover |
9.7 |
7 |
| Valve Covers |
9.7 |
7 |
| Engine Fan Strap |
8 |
6 |
| RS Pulley and regular pulley on Alternator |
50 +- 5 |
37 +- 4 |
| Pulley section |
9.7 |
7 |
| Heat exchanges to cylinder head |
23 |
17 |
| Heat exchangers to cat conver or front muffler |
23 |
17 |
| Final muffler/tail pipe clamp |
25 |
18 |
| Strap for cat converter |
20 |
15 |
| Muffler Strap |
20 |
15 |
| O2 sensors |
50-60 |
37-44 |
| Plug nut to catalytic converter |
15 |
11 |
| SAI lines to camshaft housing |
25 |
18 |
| Belt monitoring bracket to crankcase |
15-20 |
11-15 |
| Belt monitoring switch to bracket |
9.7 |
7 |
| Fuel line to engine - return |
35 |
26 |
| Fuel line to engine - supply |
35 |
26 |
| Fuel pump to body |
6 |
5 |
| Cap nut on fuel pump |
20 |
15 |
| Fuel Filter |
35 |
26 |
Transmission
| Item |
Nm |
Ft-Lbs |
| Oil Drain Plug |
30 |
22 |
| Transmission support to body |
46 |
34 |
Body
| Item |
Nm |
Ft-Lbs |
| Seat bolts |
23 |
17 |
